通用型實驗室攪拌器,適用于常規攪拌,處理量高達25l(H2O)。轉速范圍為0/30-2000rpm
通用型實驗室攪拌器,適用于常規攪拌,處理量高達25 l (H2O)。轉速范圍為0/30 - 2000 rpm,通過微處理器控制技術自動調節轉速。安全回路設計可確保設備能在馬達堵轉或過載狀態下自動停止運轉。可持續比對攪拌軸的實際轉速和設定轉速,并自動調節轉速偏差。這項功能可保證在實驗過程中轉速的恒定,即便是在樣品粘度發生變化的情況下。
○數字顯示轉速
○無級調速
○穿透式攪拌槳
○過載保護
○短時間過載運行
○外形精巧
○*運行
○錯誤代碼顯示功能
Deviation of speed measurement n > 300rpm: | 1±% |
Width: | 86mm |
Depth: | 208mm |
Hollow shaft, inner diameter: | 11mm |
Deviation of speed measurement n < 300rpm: | 3±rpm |
Extension arm length: | 220mm |
Chuck range min. diameter: | 0.5mm |
Chuck range max. diameter: | 10mm |
Setting accuracy speed: | 1±rpm |
Extension arm diameter: | 16mm |
Speed min.: | 0/30rpm |
Height: | 248mm |
Torque max. at stirring shaft: | 40Ncm |
Nominal torque: | 0.4Nm |
Power input: | 118W |
Voltage: | 230/115/100V |
Viscosity max.: | 30000mPas |
Motor rating input: | 118W |
Weight: | 4.4kg |
Motor rating output: | 84W |
Output max. at stirring shaft : | 84W |
Stirring quantity max. per stirring position (H2O): | 25l |
Speed max.: | 2000rpm |
Permissible ON time: | * |
Fastening on stand: | extension arm |
Torque display: | no |
Speed control: | electronic, stepless |
Temperature display: | no |
Hollow shaft (push-through - when stopped): | yes |
Stirring element fastening: | chuck |
RS 232 interface: | no |
Analog output: | no |
USB interface: | no |
Protection class according to DIN EN 60529: | IP 42 |
Speed display: | 7 segment LED |
Reversible direction of rotation : | no |
Permissible ambient temperature min.: | 5°C |
Permissible ambient temperature max.: | 40°C |
Permissible relative humidity: | 80% |
Frequency: | 50/60Hz |
explosion proofed: | no |
Motor principle: | Brushless DC |
Intermittent operation: | no |
housing material: | alu-cast coating / thermoplastic polymer |
clean room qualified: | no |
Timer: | no |
*您想獲取產品的資料:
個人信息: